Thermaltake Present Two New Pacific Watercooling Kits With Hard Tubing

👤by Tim Harmer Comments 📅26.05.2016 19:49:17
PRESS RELEASE



Taipei, Taiwan - May 26th, 2016 - As part of its “hardcore” spirit towards ultimate custom PC water cooling, Thermaltake launches the new Pacific RL360 D5 Hard Tube RGB Water Cooling Kit and Pacific RL240 D5 Hard Tube Water Cooling Kit. These two water cooling kits are the featured products in this year’s cooler category. The RL360 water cooling kit features three Riing 12 RGB Radiator fans and a 360mm radiator, while the RL240 water cooling kit comes with two red Riing 12 LED Radiator fans and a 240mm radiator. Most importantly, both kits are comprised of one Pacific W1 CPU water block, one Pacific PR22-D5 pump and reservoir combo, four V-Tubler PETG tubes, six Pacific G1/4 compression fittings (chrome), one red C1000 Opaque coolant, and other accessories. Together, these provide the best liquid cooling solution for PC DIY enthusiasts to build up a system with exceptional thermal performance and aesthetics!

Exclusively “Tt LCS Certified”

Tt LCS Certified is a Thermaltake exclusive certification applied to products that pass the rigorous hardcore enthusiast standards that only the world’s best LCS chassis are held to. The Tt LCS certification was created so that we at Thermaltake can clearly convey to power users and enthusiasts which chassis are built and tested to be best compatible under extreme liquid cooling configurations. This ensures you get the best performance, compatibility and features.



Pacific RL360 D5 Hard Tube RGB Water Cooling Kits Include:

Riing 12 RGB LED Radiator Fan (3 Fans Pack)

Three patented LED circular 256 multicolored 120mm radiator fans are included. To achieve the best cooling performance, the Riing RGB Series applied a high-static pressure design and hydraulic bearing for silent operation to guarantee ultra-low noise. The four corners of the fan are also designed with anti-vibration pads to strengthen the stability during operation. With the self-contained smart controller, users can freely adjust fan speed as well as fan colors. The smart controller allows users to switch between 5 modes in the LED combo: red, blue, green, white and multicolor with 256 colors. In multicolor mode, users can even pause to choose the preferred color gradient.

Pacific RL360 Radiator

With high-density fin design (FPI: 14), the 360mm radiator is optimized to accommodate high airflow and high air pressure with increased capacity and provides superior cooling performance to all components.




Pacific RL240 Hard Tube D5 Water Cooling Kits Include:

Riing 12 LED Radiator Fan (Red) (2 Fans)

The water cooling kit comes with two 120mm radiator fans. The patented LED Riing maintains color and brightness uniformity; the lighting effect is visible from all sides and angles. To produce an impressive cooling performance, the Riing 12 LED fan is applied high-static pressure design. In addition, hydraulic bearing for silent operation guarantees ultra-low noise. The four corners of the fan are also designed with anti-vibration pads to strengthen the stability during operation.

Pacific RL240 Radiator

With high-density fin design (FPI: 14), the 240mm radiator is optimized to accommodate high airflow and high air pressure with increased capacity and provides superior cooling performance to all components.


Pacific RL360 D5 Hard Tube RGB and Pacific RL240 D5 Hard Tube Water Cooling Kits Mutual Features:

C1000 Opaque Coolant Red

Made in Germany, the non-flammable C1000 Opaque Coolant is a ready-to-use cooling solution with at least 3 years shelf life in airtight containers, providing great performance while preventing the entire cooling system – copper, brass, nickel, and aluminum – from corrosion.

Pacific W1 CPU Water Block

Pacific W1 CPU water block is constructed with a copper base and anti-corrosive nickel plating to provide exceptional heat transfer and cooling performance. Most importantly, the W1 CPU water block fits all modern CPU sockets.

Pacific PR22-D5 Pump/Reservoir Combo

Manufactured from high quality POM and PMMA material, Pacific PR22-D5 includes a 300ml reservoir and D5 pump to provide the perfect combination for proper water cooling circulation and capacity.

V-Tubler PETG Tube 5/8” (16mm) OD 500mm (4 Pieces)

Manufactured from premium PETG, the V-Tubler rigid tubing provides custom PC water cooling configurations with reliability and durability from end to end.

Pacific G1/4 PETG Tube 16mm (5/8”) OD Compression Fittings (Chrome) (6 Pieces)

Six durable copper compression fittings allow proper connection to G1/4” ports to properly secure to cooling components.

Extraordinary Expansion

Both Water Cooling Kits include various LCS components that is convenient for PC enthusiasts to build the ultimate in custom configuration. By incorporating externally-modular upgrades for their chassis, users can easily build up an aesthetically-superior liquid cooling system.




For more details on the Thermaltake Pacific D5 Hard Tube Water Cooling Kits please visit:

Pacific RL360 D5 Hard Tube RGB Water Cooling Kit – http://www.thermaltake.com/products-model.aspx?id=C_00002905
Pacific RL240 D5 Hard Tube Water Cooling Kit – http://www.thermaltake.com/products-model.aspx?id=C_00002906



Recent Stories