Aerocool XPredator X1 Devil Red Review

👤by David Mitchelson Comments 📅09-11-12
Interior (Continued)

Continuing on, above this is a 120mm rear exhaust fan (1200RPM) and has both motherboard header and molex for connecting to the fan controller. At the top there is sufficient mounting holes for attaching dual 120mm fans for additional cooling.


120mm rear exhaust and space at top for dual 120mm fans


Over on the other side there are 3x 5.25 drive bays each have their respective tool-less design adapter for securely fixing into place. The red latch simply needs turning to open/close.

Beneath this area is a section of 6x HDD slots for accommodating both 2.5 and 3.5 drives. In order to install these, one of the provided trays must be installed we will cover this in the next section. Towards the front of the case sits a 120mm intake cooling fan which has red LEDs to coordinate with XPredator X1 when it is powered up.


The optical drive section with tool-less design



HDD section with 120mm intake LED fan


10 pages « < 5 6 7 8 > »

Comments