Included with this cooler are 3x 120mm fans. These fans are P12 Pro A-RGB, and are capable of 600-3000 RPM and 77 cfm.

The P12 Pros are A-RGB and featured 12 digital LEDs which can be controlled independently via the motherboard header. Just one cable needs to be attached to the motherboard in order to illuminate all fans.


Arctic provide one of their premium 38mm radiators – significantly thicker than the typical 27mm radiator you might find with a conventional liquid cooler. As such, it is worthwhile checking that you have 63mm of total clearance (for radiator and fan thickness).



As we’ve seen in the past, the Pro comes with a circular pump top cover and this cover attaches to the top of the pump. It is necessary to attach the pump cable before attaching the cover because it is concealed.

The coldplate is a flat copper square the lacks the customary mirror finish. Arctic do not pre-apply paste, but a small tuber of MX-6 thermal paste is included. Arctic offset mounting for Intel and AMD platforms which shifts the coldplate to the hotspot on the CPU for better heat transfer.


Above is the finished look – as you can see, this cooler looks impressive in its completed state and the RGB is completely customisable.