Recognising the clearance limitations within a computer case is essential for system builders as it identifies which hardware fits and which doesn’t.



CPU Cooler

For CPU cooler clearance there is up to 158mm for the total height. Our system uses the Noctua NH-U12P which is exactly 158mm. As you can see from the picture, there is just enough space to get the side panel fitted without obstruction. Bigger flagships like Noctua NH-D14/D15 which are 160mm will not fit inside this case.



Graphics Card

Since the upper storage cage is indented the top slot will provide best clearance. Many users will use a single card configuration so up to 13” of space is sufficient for most enthusiasts.

If however a dual graphics card configuration is installed the maximum length of the card that can be installed is 11.5”.



Cable Management

Although there is space around the storage cages serious system builders will want to know how much space there is directly behind the motherboard tray. Unfortunately there is very little clearance here – just 0.5cm.

Due to there being very little space, care has to be taken with how the cables are arranged. On the previous page, our organising of the cables allows the side panel to fit onto the chassis without a hitch.