Features

• Well-balanced cooling performance

1. Computer aided heatsink design provides fin optimization with perfect balance between high and low speed operation.
2. 4 x Direct Contact heat-pipes for seamless contact between CPU surface and cooler to provide excellent heat dissipation.
3. Wide-range PWM 120mm fan with unique blade design for excellent airflow and anti-vibration pads
4. Upgradable to dual fans and swapping of fans with extra fan-clips included to increase cooling performance.
5. Compact heatsink dimension for ease of install and maximum compatibility in all cases.

• Fan mounting using clips for easy installation and swapping.
• Versatile all-in-one mounting solution for Intel Socket LGA775/1156/1366 and AMD Socket 939/AM2/AM2+/AM3.
• Silent operation with minimal noise level at 13 dBA.

Specifications
Supported Processors

Intel®:
Socket LGA1366 / 1156 / 775:
CoreTM i7 Extreme / CoreTM i7 / CoreTM i5 / CoreTM i3 / CoreTM2 Extreme / CoreTM2 Quad / CoreTM2 Duo / Pentium® / Celeron®

AMD:
Socket AM3 / AM2+ / AM2AMD AM2/AM2+/AM3:
PhenomTM II X4 / PhenomTM II X3 / PhenomTM II X2 / PhenomTM X4 / PhenomTM X3 / AthlonTM II X4 / AthlonTM II X3 / AthlonTM II X2 / AthlonTM X2 / AthlonTM / SempronTM

Physical Specifications

• Dimensions: 120 x 79.7 x 158.5 mm (L x W x H)
• Weight: 626g
• Heat pipes: 4pcs
• Heatsink material: Aluminium fins
• Fan dimensions: 120 x 120 x 25 mm (W x H x D)
• Fan Speed: 600 - 2000 R.P.M. (PWM)
• Fan Airflow: 21.2 - 76.8 CFM
• Air pressure (mmH2O): 0.40 - 3.90 mmH2O
• Bearing Type: Long life sleeve bearing
• Fan life expectancy: 40,000 hours
• Fan Noise Level (dB-A): 13 - 32 dBA
• Connector: 4-pin



The Cooler Master Hyper 212 Plus sports some very impressive specifications. It's dense aluminium fin design and heat pipes puts its weight on par with the Thermolab Baram. Although its dimensions are much smaller than the Noctua NH-U12P and the Thermolab BARAM, especially in terms of width, it had a very effective fan to compensate for this. High air pressure means that air flow across the tightly spaced aluminium fins will not be impeded as much. To maximise on the small design, Cooler Master opted for the Direct Touch approach with its heat pipes for greater heat conductivity.