Cooler Master Seidon 120M Review

👤by David Mitchelson Comments 📅13-02-13
Installation Process

In order to demonstrate the installation process for Seidon 120M we are installing the cooler on the Intel LGA2011 socket.

The first step in the installation process for Seidon 120M is to attach the four stand-offs to the mounting holes on the mounting plate. Cooler Master provide a socket to tighten these stand-offs, making it easy to securely attach them with plenty of pressure. Once these are in place, its then time to attach the radiator and cooling fan into the space which occupies the back of the case. All of the screws are provided and installation is very easy to complete for these two items. We install the cooling fan as a push exhaust. All that is left to do is to then attach two mounting brackets to the pump as pictured below. Once these brackets are attached to the pump and after thermal paste is applied, it can then be securing attached to the CPU.

In very few steps, the Seidon 120M can be installed within any system that has a 120mm rear exhaust mounting position.

11 pages « < 4 5 6 7 > »