Corsair 300R Review

👤by David Mitchelson Comments 📅02-03-12
Interior (Continued)

In terms of cooling at the top/rear. Corsair has equipped the 300R with a 120mm rear exhaust fan. The top has no top mounted fans but there is mounting holes for dual 120/140mm cooling fans.


120mm rear exhaust fan with top mounted holes


On the other side of 300R there are 3x 5.25 drive bays, each come with a tool-less design mechanism that we have experienced on other Corsair computer cases. The clip simply flips back, the drive will slot into the bay and the pins then go into the mounting holes and the clip is then flipped back into the locking position.


3x 5.25 optical drive bays with tool-less design clips


300R has a single, lower cage for HDD storage. Inside this cage, up to 4 HDDs can be installed both 2.5 and 3.5. More on this in the next section when we install our system inside 300R.

Above the HDD cage a 140mm intake fan has been pre-installed and this brings air into the case, allowing the airflow to pass over the system components.


HDD storage inside 300R


On the next page, the test system will be installed within 300R.

10 pages « < 5 6 7 8 > »

Comments