With each CPU cooler that we test, a small pea-sized blob of Noctua NT-H1 thermal paste is applied to our CPU ahead of heatsink installation. We choose to use this high-quality paste in all of our CPU cooler reviews, essentially eliminating an unnecessary variable from the subsequent results and comparison graphs.
To install the Corsair H115i Pro RGB, first, we mounted the radiator into the top of the case, ensuring all of the fan cables were pointing the correct way for better cable management while making sure the hose pipes were orientated correctly. As you can see, the Corsair 760T case we use provides ample space for a huge radiator like the H115i Pro RGB. We mounted the fans in a blowing configuration. However, they can also be used to draw air through the radiator if required.
Corsair provides several different mounting methods for a vast range of Intel and AMD sockets, however, for our installation into an Intel LGA 2011 socket, we don’t need to use any backplate thanks to the integrated screw mounts within the socket itself. The thumb screws are large and easy to turn, though we would recommend to nip them up with a screwdriver to ensure they’re secure. When securing any CPU cooler, it’s advised to gently tighten the screws sequentially by proceeding in a diagonal manner to ensure even pressure is applied.
The only thing left to do is connect up the SATA power, USB header, fan cables and the motherboard’s fan connector for monitoring purposes. We connected these up behind the motherboard tray for tidiness. We found these cables to be a little bit too short which hindered our cable routing abilities somewhat; we appreciate that not all users will possess such a large case, but some extensions or a little extra length would’ve been welcomed.
Overall, the Corsair posed no real challenge in installing, despite the cable length issues. The radiator and pump looks excellent once installed; we can’t wait to see that RGB lighting in all of its glory!
To install the Corsair H115i Pro RGB, first, we mounted the radiator into the top of the case, ensuring all of the fan cables were pointing the correct way for better cable management while making sure the hose pipes were orientated correctly. As you can see, the Corsair 760T case we use provides ample space for a huge radiator like the H115i Pro RGB. We mounted the fans in a blowing configuration. However, they can also be used to draw air through the radiator if required.
Corsair provides several different mounting methods for a vast range of Intel and AMD sockets, however, for our installation into an Intel LGA 2011 socket, we don’t need to use any backplate thanks to the integrated screw mounts within the socket itself. The thumb screws are large and easy to turn, though we would recommend to nip them up with a screwdriver to ensure they’re secure. When securing any CPU cooler, it’s advised to gently tighten the screws sequentially by proceeding in a diagonal manner to ensure even pressure is applied.
The only thing left to do is connect up the SATA power, USB header, fan cables and the motherboard’s fan connector for monitoring purposes. We connected these up behind the motherboard tray for tidiness. We found these cables to be a little bit too short which hindered our cable routing abilities somewhat; we appreciate that not all users will possess such a large case, but some extensions or a little extra length would’ve been welcomed.
Overall, the Corsair posed no real challenge in installing, despite the cable length issues. The radiator and pump looks excellent once installed; we can’t wait to see that RGB lighting in all of its glory!
