Deepcool LE500 Review

👤by David Mitchelson Comments 📅18-07-22
Closer Look

Included with this cooler are 120mm fans. These fans are PWM and capable of 500-2250 RPM and airflow of up to 85.85 CFM.

Both fans are RGB LED ready and require no additional cable for this lighting, they both just connect to the motherboard via a 3-pin PWM connector.

The top cover on the pump is very simple in its design and the ring around the edge and Deepcool logo are the only elements that feature RGB lighting. The logo cannot be rotated. The tubes which fix to the pump are rubber and can be adjusted to a specific angle if required. Again, like the fans the pump features a 3-pin PWM connector and will provide 220W.

On the bottom-side of the block, we can see the copper baseplate and pre-applied thermal paste. The circumference of this is unlikely to cater for larger CPUs which fall into the HEDT category, even though they are on the compatibility list.

LE500 is a 240mm variant within the LE Series and therefore has a 240mm radiator. As with other liquid cooling products from Deepcool, the company is very keen to mention that this LE500 has the anti-leak technology.

9 pages « 3 4 5 6 > »