Fractal Design Node 605 Review

👤by David Mitchelson Comments 📅25-02-13
Thermal Performance Testing

Inside Node 605 there are two Silent Series R2 120mm cooling positioned opposite one another but setup as intakes.

To discover the thermal performance of the Node 605 we will record idle temperatures after 20 minutes from a cold boot. We will then stress the system and temperatures will again be monitored after 30 minutes have elapsed.

For the purpose of accurate analysis the idle and load temperatures for CPU and motherboard will be recorded and the range between idle and load will be calculated to determine how efficient cooling is.

Fan controller will be set to medium for testing.

NOTE: Ambient temperature is 20C

System Components





Noise

Just like the Node 304, 605 has the same specification of fan and we were pleased with the results this cooling fan gives both on an audible level and thermal performance. Even if the noise emitted from the fans is not to your liking – the three-speed fan controller allows for the customisation of the configuration anyway.

8 pages « < 5 6 7 8

Comments