Rosewill THOR V2 Review

👤by David Mitchelson Comments 📅16-02-12
Interior (Continued)

At the back of THOR V2 we have a 140mm rear exhaust fan and a 230mm exhaust fan. There are also mounting holes for dual 120/140mm fans. There is space at the top for mounting a 240 water-cooling radiator.


140mm rear exhaust and 230mm top exhaust with room for water-cooling


Over on the other side of THOR V2 are 6x 5.25 drive bays all of these have a tool-less design mechanism so there is no need to use a screwdriver. The drive simply needs to slide into an available slot and then just slide the latch across for a fixed placement. The bottom bay has a 3.5 adapter tray so that a 3.5 HDD or something of similar dimensions can be installed.


The optical drive section with up to 6 options


Beneath this is the HDD cage this again has 6 options for mounting either a 2.5 or 3.5 drive. Inside the cage are 6x steel trays in the next section we will observe the installation process. Behind the HDD cage is a large 230mm intake LED fan to give added cooling to the HDDs mounted here and provide airflow for the system.


HDD cage has 6x steel trays for 2.5 or 3.5 drives


On the next page we will install our test system within THOR V2 and see how it handles an XL-ATX configuration.

10 pages « < 5 6 7 8 > »

Comments