Further down on the floor of the chassis resides a single 3.5” HDD cage. This cage is completely tool-less and the drive simply slots into the cage and clicks into place with the latch at the side. SilverStone have also included a fabric strap which helps to pull the HDD back out of the cage once it’s installed. Sitting on the roof of this cage is a CPU cooler support mechanism which helps to relieve heavy CPU coolers from bending etc.

There is also another cage over at the front of the case which features a series of five options for 3.5” drives in the upper section and again another slot for a 3.5” drive via the tool-less method.

In both the lower cages within Raven 4 two 2.5” drive can be installed – there are mounting holes for this.





Finally at the front and towards the top of the case is the optical drive bay which can house two 5.25” drives – standard screws are required for installation, there are no tool-free design mechanisms.