Thermaltake Chaser A31 Review

👤by David Mitchelson Comments 📅07-02-13
Thermal Performance Testing

Placed inside A31 are just two 120mm cooling fans, one as an intake at the front and another at the rear as an exhaust. Both fans operate at 1000RPM.

To discover the thermal performance of the A31 we will record idle temperatures after 20 minutes from a cold boot. We will then stress the system and temperatures will again be monitored after 30 minutes have elapsed.

For the purpose of accurate analysis the idle and load temperatures for CPU and GPU will be recorded and the range between idle and load will be calculated to determine how efficient cooling is.

NOTE: Ambient temperature is 20C

System Components

CPU AMD Phenom II X6 1055T 2.8GHz
Motherboard ASUS M4A89TD PRO
Graphics NVIDIA GTX 480 (Different from card pictured)
Memory 4GB Mushkin EM3-10666 DDR3
HDD Samsung Spinpoint 500GB SATA-II
PSU FSP AURUM GOLD 650M





Noise

With both fans operating at just 1000RPM the balance for performance and noise is well placed. The cooling performance is good and noise levels are relatively low and not disruptive by any means.

10 pages « < 7 8 9 10

Comments