Alphacool Introduces the New VPP755 Eispump

👤by Michael Pabia Comments 📅04.11.2016 19:39:18

Alphacool announces the new VPP755 Eispump, the next evolution in pump technology. The Alphacool VPP755 Eispump features a newly developed technology that throws out the common problem with the D5 pumps. Hence, the VPP755 Eispump is compatible with the D5 pump’s tops and brackets. The new VPP755 Eispump forgo the spherical bearing the D5 pumps uses and replaced it with a ceramic shaft for a more silent operation. The motor coils are outside, totally opposite of the D5 motor. All of these improvements reduce vibration significantly and improve stability of the pump. Also, this new mechanism cuts the power consumption of the pump by half. Another innovation new to the VPP755 Eispump is the 4-pin molex connector that can be plugged directly to the power supply. The new VPP755 Eispump offers many control options.

At the rear of the VPP755 Eispump is a rotary switch for the five levels of control for the pump. With this, manual control and PWM control can work together, a system patented to Alphacool. Using the rotary switch, the maximum RPM of the pump can be configured not to exceed the PWM control. With this, users are offered better and a wider customization options depending on the required cooling performance. The VPP755 Eispump is also a centimeter shorter than the D5 pump and has an aluminum cap on it.

Dimensions (DxH): 60 x 53,5mm
Cable length: 50cm
Standard voltage: 12V DC
Power consumption: 14W
Accepted voltage: 8-13v DC
Pressure at 12V: 4m head
Maximum flow: 350l/h
Pump fluid: water, water/glycol mixture
Maximum system temperature: 65°C
Power connection: 4-pin Molex
Speed sensor signal: 3-pin
PWM signal: 4-pin
Special features: adjustable to five levels
- Level 1: 1800 RPM
- Level 2: 2500 RPM
- Level 3: 3200 RPM
- Level 4: 3900 RPM
- Level 5: 4500 RPM

The Alphacool VPP755 Eispump is now available for €69.95 / £ 62.15. For more information, visit the Alphacool website.

Related Stories