ARCTIC Announces Accelero XTREME Plus & ARCTIC F TC Fan

👤by Connell Parr Comments 📅31.08.2010 18:18:20

      Please share your thoughts by commenting below!

Comments

ARCTIC Announces Accelero XTREME Plus & ARCTIC F TC Fan

Matty-Hodgson
Moderator



Posts: 14
Joined: 2017-06-28

#931 Posted on: 04.12.2017 22:53:19
We're all really looking forward to seeing the work go into this build.

ARCTIC Announces Accelero XTREME Plus & ARCTIC F TC Fan

Mishima
Administrator



Posts: 27
Joined: 2017-03-16

#932 Posted on: 05.12.2017 10:15:26
Hey - welcome! :)

Can't wait to see how this one turns out. That case is a beast.

ARCTIC Announces Accelero XTREME Plus & ARCTIC F TC Fan

dmodz
Junior Member



Posts: 7
Joined: 2017-12-04

#938 Posted on: 06.12.2017 00:20:14
Put the case together without the fans as will be replacing the stock fans with some RBG's will not be going full rainbow but more to utilise a light blue or turquoise and white effect. Looking to add a triple 360 rad to the top of the case and a double 240 to the front.

7 8 3 4 5 6

ARCTIC Announces Accelero XTREME Plus & ARCTIC F TC Fan

dmodz
Junior Member



Posts: 7
Joined: 2017-12-04

#943 Posted on: 07.12.2017 19:00:18
Major component I forgot to add was the GPU. Asus Rog Strix 1080ti should give enough punch. Of course we will be removing the heatsink and fans and adding a water block.

The fans that come boxed with the Conquer are decent 120's but we have removed these in order to install 5 new fans to sit with the 360 (top) and 240 (front).

Liquid colour is still up for debate, however we are leaning towards liquid.cool's sky blue which will match in well with the striking blue lines on the panels.

9

ARCTIC Announces Accelero XTREME Plus & ARCTIC F TC Fan

dmodz
Junior Member



Posts: 7
Joined: 2017-12-04

#967 Posted on: 21.12.2017 15:16:22
Big Shak? Mans not hot? Rams not hot, or won't be when we watercool it! Why do you need to watercool ram I hear you say. You dont, you dont need a full custom loop in a lot of systems however seeing as its there lets add it. Also lets add it with some RGB lights for good measure.

Starting with 2x8 sticks of DDR4 Corsair Vengeance 3000MHz, these already have a nice sleek black heatsinks attached which for this build would of looked good without any tinkering.

10

So adding to the mix a Barrow waterblock with twin sinks for the corsair ram. The pack from Barrow comes with a nice foam mat which i'm assuming is for protection in transit but we found it unfolds nicely as a little work station too.

11

Now for the job I dislike the most, I've always had a real fear of stripping sinks off ram that im going to kill it in the process. I use a tried and tested method of applying a little heat from a heatgun to the sink while holding the ram with bare fingers, this way I know how hot the stick is getting as it could be very easy to overheat.

A small amount of heat eases the adhesive to the stick giving a more gentle release.

Some nudes!

12

13

Once stripped we added the the new thermal pads supplied in the Barrow pack.

14

The build quality on the ram sticks is solid and all screws are countersunk with mini allen keys supplied.

15

16

17

The block simply screws onto the top of the heatsinks when the ram is attached to the board. The Block has wide slots to make sure any slight variance in fitting or board a can be accommodated. Good to go!

18

This build is not an RGB rainbow fest however the beauty of all these products being RGB these days, is the range of lighting that can be achieved with more subtle settings. Yes you could go bonkers and make a rainbow, but for this build we can achieve a gentle light blue white effect.

Pic below of the lights in action.

19

ARCTIC Announces Accelero XTREME Plus & ARCTIC F TC Fan

dmodz
Junior Member



Posts: 7
Joined: 2017-12-04

#971 Posted on: 22.12.2017 12:34:39
In this build we have decided to utilise as much of the case as possible so fitting the a front 240 and a top 360 radiator to add as much chill factor to the loop as possible.

Using Barrow slim Dabel series rads and matt black Barrow rad fans.

20 21 22

ARCTIC Announces Accelero XTREME Plus & ARCTIC F TC Fan

dmodz
Junior Member



Posts: 7
Joined: 2017-12-04

#1192 Posted on: 02.03.2018 14:06:20
Well where do we start.. long break since thee last update but a lot going on, In short the mod is nearly done. Before Christmas I ended up in hospital yet again with an ongoing health condition and have been pretty much in and out since. Pretty much everything in life has been on hold with the focus on family and health. I've started treatment now so things are slow but at least a bit of flexibility is back.

Because of the extended length of time this build has been going on the client that was on the receiving end of this case has been chatting about making some changes. Originally a big fan of F1 the case was planned to style the the last seasons colours, Since then the new ranges have been released. Rather than go with one seasons colours the client decided a neutral mercedes black was the theme he would like to go with. We did a few liquid fills of tubes held against the system and its fate was set after he saw it in plain black with clear liquid (no dye).

We have used 100% of Barrows kit this time in the build and I dont think ive used as much RGB kit in any build i've ever done. testing it looks fantastic with a cool white light so it gives the option in future of changing out the look and feel without repainting panels.

A couple of images are from video stills so excuse the slight blur effect.

36 37 38 39 40 41 42

ARCTIC Announces Accelero XTREME Plus & ARCTIC F TC Fan

dmodz
Junior Member



Posts: 7
Joined: 2017-12-04

#1193 Posted on: 02.03.2018 14:10:35
Front panel Carbon and chrome look Merc badge

43

Recent Stories