CPU: e2160 @ 1.8ghz
Mobo: Zotac 9300 WiFi ITX
GPU: ION @ 450mhz/1200mhz
RAM: 2gb Geil ULL PC6400 DDR2
HDD: 80gb WD 5400rpm laptop HDD
Optical drive: NEC slimline laptop DVDRW
CPU cooler: Akasa AK-956SF heatsink

I used OCCT to monitor temperatures and generate full load stress during testing.


Low fan speed results.


Medium fan speed results.


High fan speed results.

At stock speed the Antec returned nice results across the board. The fan was virtually silent at the low setting and i’d only advise medium or high fan speeds if temperatures really becomes an issue since the noise was a little more intrusive.

I did try to run overclocked settings with the CPU @ 3ghz but the system restarted under load. It seemed the power draw at this overvolted high clock was pushing beyond the 65w capability of the supplied PSU.