One thing I would like to commend CM for with the Enforcer is the USB3.0 header cable. Finally we have something to connect to our USB3.0 ready motherboards other than the USB cables that many cases seem to have (routed from the front to the back). This means things are going to be a lot more tidy and USB3.0 ports on the I/O aren't unnecessarily taken up.
Finally a USB3.0 header cable!
HDD install is very simple, just attach a pair of brackets to wither side of the HDD and slide the drive into an available slot on the rack. The drive then clicks into place.
HDD install is very simple - HDD brackets
Behind the motherboard tray we have just under 1.5cm of clearance between this and the side panel. This gives adequate clearance for routing through the thick cables and means the side panel will fit on without too much adjustment.
Just under 1.5cm of clearance behind the motherboard tray
