Corsair Graphite Series 600T Review

👤by David Mitchelson Comments 📅09-11-10
Installation

Well what can I say, the 600T was an absolute dream to work with. Side panels that pop out within a few moments, oodles of space within and the opportunity to conceal all of the cabling with ease. I can't really stress enough how easy this case is to work with. Behind the motherboard tray there is masses of clearance on the CPU cooler backplate. Below I will take you through a few of the elements within the installation.


Installation finished



Lots of space around the back - lots of clearance for CPU cooler backplate


Included within the 600T is a small accessories pack that includes a quick guide, product leaflet, RMA detail sheet, cable ties, rubber washers, self tapping screws, motherboard screws and a set of locking keys for the top/side panel of the 600T.


Accessories kit included within the 600T


Installing HDDs is very easy, all you have to do is pop the drive into 1 of the 6 provided frames as pictured. The drive then just slide into one of the channels inside the cage, once in place it will click. Everything is fits flush to the cage.


Installing HDDs is very easy


Regarding graphics card compatibility. Installed within the 600T is the HD5870, there is almost 5" between the end of the card and the HDD cage so a HD5970 will easily fit. But even so, should you require it, that top HDD cage can be removed to allow for extra room.


5" clearance gap to the HDD cage from the end of the HD5870




10 pages « < 5 6 7 8 > »

Comments