Corsair Hydro Series H105 Review

👤by David Mitchelson Comments 📅22-02-14
Packaging, Bundle & Fans

Packaging for H105

The packaging for H105 is very much in keeping with other Corsair products, especially their cooling solutions. Arriving in a large box, there is a depiction of the cooler on the front and over on the sides of the box there is technical information.

Inside, the included items that make up the bundle are carefully arranged inside an eggshell type box and each have their own protective bag.

Bundled with H105 are the following items:

• Two SP120L high performance fans
• Mounting bracket and hardware
• Colour accent rings
• Quick Start Guide
• Y cable for fan connection

H105 has all the components and kit for an assortment of sockets which include: Intel™ LGA 1150, 1155, 1156, 1366, and 2011 and for AMD™: sockets FM1, FM2, AM2, and AM3.

Corsair has decided to provide interchangeable accent rings so that the pump can be switched from the default silver ring to red or blue depending on your specific system configurations.

Accessories bundle included with H!05

Included with H105 are two 120mm cooling fans which are to be attached to the 240mm radiator. The fans use a 7-blade design and is based on Air Series SP120 capable of up to 2700RPM. They are also specifically designed for radiators, unlike the fans often seen bundled with other ALCs.

The corners on these fans are rubberised to allow for anti-vibration and the shape enable both to interconnect when side-by-side. Cabled to these fans is a 3-pin connector, this can be plugged directly into a motherboard header or used with the provided Y-cable.

Two Air Series SP120s are included

11 pages « 2 3 4 5 > »