Corsair Hydro Series H80i GT Review

👤by David Mitchelson Comments 📅22-05-15
Packaging, Bundle & Fans

H80i GT arrives in the usual Corsair packaging; the box is very well-designed with a depiction of the product on the front and all of the fundamental features listed. Techncial details can be found on the sides and reverse for those wanting to discover more about the cooler.

Inside, all of the components are encased with a cardboard tray and covered in plastic to prevent any damage during transit.

Corsair has given H80i GT support for a wide-selection of different socket types including:

Intel™ LGA 1150, 1155, 1156, 1366, 2011, 2011-3
AMD™ sockets FM1, FM2, AM2, AM3

As well as the mounting kit for the different sockets, there are also items such as thermal paste, Corsair LINK USB header cable, instructions guide with warranty details and screws for mounting the radiator and fans to the case.

Due to the dimensions of the H80i GT radiator, Corsair has supplied two SP120L cooling fans which as their name implies are 120mm in size.

These fans are a seven-blade design and are PWM ready – allowing up to 2600RPM. The fan speeds can of course be modified using the Corsair LINK software. Each fan uses a 3-pin header cable which connect to the cables running from the H80i GT pump.

11 pages « 2 3 4 5 > »