Hue+ arrives in small, attractive box which shows a working demonstration of the kit on the front and on the back lists the features. Inside, the box there is a professionally designed cardboard tray-box which carries all the associated cables and components. NZXT also include an instructions sheet which guide you through the set up.


Inside the packaging there are a selection of cables which are required to get Hue+ fully operational. These cables include:

• 1 x 500 mm Extension cable
• 1 x 300mm Extension cable
• 2 x 100mm Extension cable
• 2 x Molex to AC power
• 1 x Micro USB to USB header
• 4 x Screws
• 5 x Cable ties

The extension cables are used to interconnect each LED strip while the Molex to AC power obtains power from the PSU and the Micro USB to USB header allows a digital interface with NZXT’s CAM software.



The beating heart of Hue+ is a 2.5” device which features a sleek, plastic enclosure. Along with the central unit, NZXT bundle four LED strips – each of the LED strips works in conjunction with the supplied extension cables.

At the rear of the Hue+ device there is a DC 5v port, micro USB port and two independent channel ports which use a 4-pin connection.