As previously mentioned, the area for mounting the PSU is found on the reverse side of Primo. The PSU will be positioned on its side with the fan facing the side panel. There are a series of six rubber mounts which act as anti-vibration pads which we are pleased to see.
Next to this area there is also a rubber platform which can support various different pumps and can even be re-positioned elsewhere.
The PSU area on the reverse side, with rubber mounts
Towards the front of the case, Phanteks have placed two removable HDD cages which can house 2.5” and 3.5” drives. Inside the cages are a series of six trays.
The cages are fixed into place with thumbscrews which can be easily removed to make way for more clearance and a look at the front mounted cooling fans which are again 140mm (PH-F140SP – 1200RPM).
Two cages, offering up to six options for storage drives
PH-F140SP intake cooling fans at the front
There are additional locations for installing storage drives too – Phanteks have integrated mounting plates to the side of the 5.25” cage to allow 2x 2.5” drives to be attached.
Additional locations for 2.5” drive installation
