Within H440 there are four cooling fans – three 120mm intakes and a single 140mm rear exhaust. This configuration follows a traditional push-pull arrangement which usually yields great results.

To discover the thermal performance of H440 we will record idle temperatures after 20 minutes from a cold boot. We will then stress the system and temperatures will again be monitored after 20 minutes have elapsed.

The delta temperatures are recorded for the test with the ambient being subtracted from the reported maximum core temperatures from the test.

System Components


Noise

A combination of thick panels and noise damping material contribute to low-noise operating for H440. Very little noise leaks from the case which is definitely a bonus.